top of page
Products > Metal Polishing Machine (Wet)
Metal Polishing Machine (Wet)
SH
Product Features
HMI Touch Screen Panel with Graphics
A 10-inch large color touch panel - all start-up and fault messages are clearly displayed with graphic signs.
Speed of the conveyor belt can be easily adjusted
Thanks to the AC motor, the feeding speed can be set from 0.3m/min to 12m/min. The machine can be widely used in semiconductor related machinery and for processing stainless steel materials after flame cutting, laser cutting, punching (rough edges holes) etc.
High-efficiency structure of rotating chamfering wheel
With 6 sets of rotating chamfering wheels set up, the rotating chamfering wheel can swing left and right to achieve the best structure combination with zero dead angle, allowing excellent grind quality and output value.
The sanding brush set comes with an AC motor and can be adjusted up and down in 0.1mm increments.
The grinding brush group is adjusted up and down with AC motor. This set up allows increasing grinding force, extends service life of the brush set, making the machine operation costs more economical.
Can be incorporated with a robotic arm.
The machine can be incorporated with a robotic arm for labour cost savings.
Product Specifications
Working widths: 610, 920, 1300mm
Sanding head options: non-woven roller, sanding brush or steel brush rollers are available
Maximum working thickness: 130mm
Mechanical Features
The touch screen interface is installed. Features of the fault message prompts of the sanding/grinding position improves the automation of the sanding operation
C – The polishing drum is adjusted by a servo electric cylinder.
S – For polishing brush roller : non-woven roller, sanding brush or steel brush rollers are available.
Specification
➤ SH
bottom of page